Kampek
040-502 9474Request quote →
Seal for Life
Covalence logo

DHEC

End cap for the terminations of a pre‑insulated pipeline: a shrink component that closes the casing end and keeps water out of the insulation where the line ends or breaks. Used at line terminations, transitions, and where pre‑insulated pipe meets uninsulated pipe.

23 codes
KMP-0005

The termination

The drawing is Kampek's own. It asserts only what is already published on this site or on the manufacturer's own pages.

All drawings

DHEC end cap, longitudinal section through the termination of a pre-insulated lineSection through a line termination. On the left the pre‑insulated pipe: steel carrier pipe, PUR insulation and PE casing. On the right the carrier pipe continues uninsulated. The casing and the insulation stop, which would leave the insulation space open. The DHEC end cap is shrunk down from the casing onto the carrier pipe and closes that space, so water cannot reach the insulation.Pre‑insulated pipeUninsulated pipe12345KMP-0005
  1. 1PE casing
  2. 2PUR insulation
  3. 3DHEC end cap, casing down to carrier pipe
  4. 4The cap seals down onto the carrier pipe
  5. 5Carrier pipe continues uninsulated
KMP-0005. At a line termination the casing and insulation stop. The DHEC end cap closes the insulation space against the carrier pipe.
Dimensions and codes

Size and order code in one table

These come from Kampek's own product catalogue. Take the code from the row and request a quote with it, so nobody has to retype it. Availability is confirmed with the quote.

DHEC end cap

The size number is the catalogue's own series number, not a millimetre dimension. The source does not say what it measures.

DHEC, Covalence
Technical data

What the manufacturer datasheet says

Application
Pipeline terminations and transitions
Size series
2000–3000
Sizes
200020602100220023002340235024002500260026302700280029003000
Covalence

Other products in this family

Wrap‑around heat‑shrink sleeve for sealing the joint casings of pre‑insulated district heating pipes.

Closure patch for Covalence wrap‑around heat‑shrink sleeves.

Heat‑applied closure patch that seals the foam‑injection hole in a pre‑insulated pipe casing after PUR foaming, keeping water out of the insulation.

Alongside the standard range runs a set of specialty products that are asked for less often but have their own place.

Need a quote for DHEC?

Tell us quantity and schedule; we reply on availability and terms within days.

CallRequest quote →