WPCP‑IV
Closure patch for Covalence wrap‑around heat‑shrink sleeves. Seals the longitudinal overlap of the sleeve. Same cross‑linked HDPE and adhesive construction as the sleeve itself.
The closure
The drawing is Kampek's own. It asserts only what is already published on this site or on the manufacturer's own pages.
- 1PE casing
- 2Wrap‑around heat‑shrink sleeve: backing and adhesive
- 3Longitudinal overlap of the sleeve
- 4WPCP‑IV closure patch over the seam
- 5Same cross‑linked HDPE backing and adhesive as the sleeve
Size and order code in one table
These come from Kampek's own product catalogue. Take the code from the row and request a quote with it, so nobody has to retype it. Availability is confirmed with the quote.
WPCP‑IV closure patch
The two widths do not cover the same lengths. A dash means that combination is not in the catalogue.
| Length (mm) | Width 100 mm | Width 150 mm |
|---|---|---|
| 153 | WPCP-IV-100X153(S50) | – |
| 170 | WPCP-IV-100X170(S50) | WPCP-IV-150X170(S50) |
| 190 | WPCP-IV-100X190(S50) | WPCP-IV-150X190(S50) |
| 218 | WPCP-IV-100X218(S50) | WPCP-IV-150X218(S50) |
| 255 | WPCP-IV-100X255(S50) | WPCP-IV-150X255(S50) |
| 283 | WPCP-IV-100X283(S50) | WPCP-IV-150X283(S50) |
| 298 | WPCP-IV-100X298(S50) | – |
| 320 | WPCP-IV-100X320(S50) | WPCP-IV-150X320(S50) |
| 430 | – | WPCP-IV-150X430(S50) |
| 438 | WPCP-IV-100X438(S50) | WPCP-IV-150X438(S50) |
| 638 | WPCP-IV-100X638(S50) | WPCP-IV-150X638(S50) |
| 768 | WPCP-IV-100X768(S50) | WPCP-IV-150X768(S50) |
| 898 | WPCP-IV-100X898(S50) | WPCP-IV-150X898(S50) |
What the manufacturer datasheet says
32 codes in Kampek's catalogue
Pick a code and it carries straight into the quote request. Availability is confirmed with the quote.
Other products in this family
Wrap‑around heat‑shrink sleeve for sealing the joint casings of pre‑insulated district heating pipes.
Heat‑applied closure patch that seals the foam‑injection hole in a pre‑insulated pipe casing after PUR foaming, keeping water out of the insulation.
End cap for the terminations of a pre‑insulated pipeline: a shrink component that closes the casing end and keeps water out of the insulation where the line ends or breaks.
Alongside the standard range runs a set of specialty products that are asked for less often but have their own place.
Need a quote for WPCP‑IV?
Tell us quantity and schedule; we reply on availability and terms within days.